Wedding Aces WeddingWire Blog
Daisy Bud

No Sewing Machine? No Problem!

June 6th, 2012 by     


I don’t have a sewing machine…I just can’t afford one. Hats off to those of you that are pros at sewing on those things (or just sewing in general), I never got the hang of it. Watching the creation of clothes on “Project Runway” was like magic to me, “How DO they DO that?” So for those of you who are missing the domestic piece of your brain like me, I have found the answer from the crafting gods that allow you to never have to sew another stitch! This magical product is called Stitch Witchery. Do you have an iron? That is actually one domestic appliance I do have, but if you don’t have that, you probably have a flat-iron for your hair lying around right? I will go step by step through how to use Stitch Witchery to make really adorable bunting for your wedding. It’s so easy, anyone can do it, even the domestically challenged…like me.

First thing’s first: Materials

wedding do it yourself , materials2

You’ll need: As many fabric types you want, go nuts! Twine, a Tape Measure, Scissors, a Ruler, a Pencil some Stitch Witchery Tape, a Hair Straightener (or an iron, the straightener is just more portable) heated to medium heat, and a Cardboard Pattern.

The Cardboard pattern you can make to your own specifications. Mine is 8″ long. The size of this will determine the size of your flag when we are all done.

Alright, grab your favorite fabric and let’s work with that first! Open it up and place your cardboard pattern on the back side of the fabric.

wedding do it yourself , trace

Take your pencil and trace along the sides of the triangle, but not the bottom, then flip the pattern over and trace again on the other side. This forms a diamond shape.

wedding do it yourself , trace other side

Once you have your diamond shape, cut it out of your fabric. Don’t worry about things being perfect, well at least I didn’t, this is supposed to be rustic! Jagged edges add character!

wedding do it yourself , finished diamond

Now grab your twine and measure out a length you like. The ends of the twine should be longer than the space between the flags. For instance, when I started I measured in 12″ and then between the flags I measured 6″.

wedding do it yourself , measure1

Next place your diamond underneath the twine, leaving however much space between the flags as you want. Cut yourself an inch or less of the Stitch Witchery and place that on the fabric underneath the twine.

wedding do it yourself , rope and glue

So um, notice how the fabric is different? Well sometimes when I work I get carried away with the project and forget to take pictures…so I made another one to make up for what I forgot to photograph…oops! At any rate, there is one thing I forgot to picture, but it is really easy. At this point your straightener or iron should be heated to medium heat. Gently pick up your fabric and twine and slide the heated straightener underneath and close it on the little glue strip and twine for about 5 seconds. This is where the Stitch Witchery works its magic and melts to the fabric and the twine adhering them both together. Yes, some will get on your straightener but it is *very* easy to clean, once it’s cooled you can just rub it right off. Now that your twine is adhered to one spot on the fabric, it will be easier to work with. Now cut yourself some longer strips of Stitch Witchery. Whatever the length you made your triangle, that’s the length of strips you need.

wedding do it yourself , cut glue

Place your strips of Stitch Witchery along the edge of the bottom triangle only. If you want you can also place smaller bits in the middle to ensure it gets totally stuck together, but it’s not necessary.

wedding do it yourself , lay glue

Now carefully fold the other side of the diamond over the twine and line it up with the bottom triangle. Make sure all the glue strips are tucked in nicely.

wedding do it yourself , fold over

Now for the fun magical part again! Take your straightener or iron and move it slowly all around the edges to heat and melt the Stitch Witchery. You shouldn’t hold it over one spot for any length of time, it’s more of a steady movement and heating. It melts pretty quickly so it’s not necessary to get it very hot.

wedding do it yourself , heat

And that’s it! You are done! Now of course we rinse and repeat until you have as many flags as you want! I also bought some white fabric, to which I will probably iron on letters to spell “Thank You,” or “Mr. & Mrs.” I will also certainly just have plain ones. I am super excited that I don’t need to now drop $200 on a sewing machine, and then learn how to use one. Thanks to the magic of the Stitch Witchery, I may never be truly domestic! If I make my future kids’ clothes they will be Stitch Witched together! wedding do it yourself , icon smile I hope this step by step was helpful! Go forth and create bunting!

wedding do it yourself , finished

Share Your Thoughts!